How do you connect curtain poles?

VIDEO

.

Similarly one may ask, is it easy to put up a curtain pole?

Attach brackets to the wall Select a screwdriver to match the screw head. Drill and plug one hole for the second bracket. Insert the screw three quarters of the way in. Before fixing the second screws, stand back and survey the window to make sure that you are satisfied with the position and level of the curtain pole.

can I hang eyelet curtains on a track? You can't use eyelet curtains or tab top curtains with a curtain track. They also allow a wider range of curtain styles to be hung, including eyelet, tab top and pencil pleat.

Correspondingly, where should a curtain pole be placed?

Poles are usually fitted about 15cm above the aperture of a window, but sometimes compromises are needed if there is insufficient space or if the coving obstructs. You need to place the pole the correct height above the floor to allow the curtains to hang correctly.

What size curtain pole do I need for eyelet curtains?

The diameter of the inside of an eyelet ring (or grommet) is normally 40mm. The ideal diameter of a metal curtain pole for eyelets is 28mm. So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.

Related Question Answers

Should curtains touch the floor?

The fabric should just touch the floor or hover half an inch above. This is also a great approach for café curtains (short panels that cover only the lower portion of a window and hit the sill), which work well in spots like the kitchen and bathroom, where long drapes aren't practical.

How many curtain pole brackets do I need?

For metal curtain rods ranging from 1 inch to 1 ½ inch diameters, two brackets up to a 60-inch (5 feet) span are sufficient. Over 60 inches, three brackets are recommended.

How do you hang a curtain rod without a drill?

Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour. Repeat the same for the other side. Don't be in a rush.

How do extendable curtain rods work?

It is a telescopic pole ( i.e two sections of pole with slightly different diameters, allowing the narrower of the two to slide snugly inside the wider one), which slides in and out, making it adjustable in length to any given measurement within the maximum and minimum sizes specified.

How many inches above window should curtain rod be?

The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

How do you hang a curtain rod on a plaster wall?

The Easy Way to Hang Curtains on Plaster Walls

1. Step 1: Mark the Spot for the Bracket.
2. Step 2: Drill Top Hole.
3. Step 3: Add Screw.
4. Step 3: Insert a Molly Bolt Into the Hole.
5. Step 3.5: Add Screw.
6. Step 4: Dry Fit Bracket and Mark Second Hole Hole.
7. Step 5: Drill Second Hole and Add Screw.
8. Step 6: Repeat for Other Brackets.

How do you cut a wooden curtain pole?

Metal curtain poles can be cut with a hacksaw, or for a totally square cut, use one of our special curtain pole cutters. Wooden curtain poles can be cut with a fine tooth wood saw. Helpful Hint: Always remember that when you are cutting a curtain pole that is in two pieces you must trim equal amounts from each side.

How do you hang pencil pleat curtains on a track?

For curtain tracks you will need to insert the hooks into the low or middle row of pockets so that the heading hides the track. For poles insert the hooks into the top row of pockets so that the curtain hangs below the pole. Just make sure you insert the hooks into the pockets rather than onto the cords!