How much does a yard of 4000 PSI concrete cost

PSI MixPrice Per Cubic Yard Delivered3,000 PSI, 6.0 Sack Mix$1243,500 PSI, 6.5 Sack Mix$1264,000 PSI, 7.1 Sack Mix$1295,000 PSI, 8.5 Sack Mix$147

How much does 4000 lbs of concrete cost?

PSIAverage Price Range3,500$110-$1254,000$115-$1304,500$125-$1355,000$130-$150

Does 4000 psi need concrete?

Concrete footings and slabs on grade typically require a concrete of 3,500 to 4,000 psi. Suspended slabs, beams, and girders (as often found in bridges) require 3,500 to 5,000 psi. Traditional concrete walls and columns tend to range from 3,000 to 5,000 psi, while 4,000 to 5,000 psi is needed for pavement.

What is 4000 psi concrete used for?

4000 PSI concrete is used for heavy traffic pavement, heavy use floor slabs like shops and warehouses, and concrete footings designed to support heavy loads.

What is the cost of 1 yard of concrete?

The average cost of a yard of concrete in the U.S. is between $113.00 and $147.00. Prices vary depending on what PSI strength you order. A cubic yard of concrete covers 81 square feet at 4 inches thick. The cost of concrete for a 4″ slab costs between $1.40 and $1.80 per square foot.

How can I get 4000 PSI concrete?

1. 1 PART CEMENT.
2. 2.93 PARTS STONE.
3. 2 PARTS SAND.

Does 4000 PSI concrete cost more?

PSI MixPrice Per Cubic Yard Delivered3,000 PSI, 6.0 Sack Mix$1243,500 PSI, 6.5 Sack Mix$1264,000 PSI, 7.1 Sack Mix$1295,000 PSI, 8.5 Sack Mix$147

How long does it take 4000 PSI concrete to cure?

A typical concrete compressive strength specification requires 4,000 to 5,000 psi at 28 days.

What is the difference in 3000 psi and 4000 psi concrete?

The principal difference between the two is the volume of cement that is used to come up with the mix. Generally speaking a mix of one part of cement out of seven parts total will give you 3000 PSI. And, one part of cement out of six parts total will give you 4000 PSI.

How much weight can a 4 inch concrete slab hold?

Typically we like to limit the weight to about 40 lb/sqft on an unknown 4″ slab. In most cases you can go to 80 lb/sqft in isolated spots, but unless you know roughly what the soil bearing and reinforcing is for that slab you might be looking at cracking.

Article first time published on

How many yards of concrete do I need for a 24x24 slab?

For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.

Does higher PSI concrete crack less?

Higher psi concrete will resist cracking more but without addressing the cause of the stress cracks sooner or later the cracks will appear. Addressing cracking in concrete slabs is done long before the mix is poured.

Is 4000 psi concrete good for patio?

3500 PSI is less common in sidewalks and patios. It is more often used for foundation footings, slabs, or driveways/parking areas for heavy vehicles like an RV. 4000 PSI is a great option for serious home workshops. For instance, if you are planning on installing a car lift, or have heavy equipment secured to the slab.

How much does it cost to pour a 24x24 slab of concrete?

A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

How much is 4 yards of concrete cost?

CUBIC YARDSAVERAGE COSTTYPICAL COST RANGE2$320$294 to $3743$480$441 to $5614$640$588 to $7485$800$735 to $935

How many square feet is a yard of concrete 4 inches thick?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet.

How much is a 10 yard truck of concrete?

According to the NRMCA, a truckload (10 cubic yards) of concrete costs $1,150 to $1,450, depending on various factors such as your geographic location and the company you use. Ten cubic yards is enough to pour a driveway measuring 20 feet by 24 feet.

How much does a 24x30 concrete slab cost?

A 24×30-foot slab covers 720 square feet. With an average price of $6 per square foot, you may pay about $4,320 for a slab foundation. However, the price can range from $4 to $8 per square foot, resulting in a total cost between $2,880 and $5,760.

How much does a 30x50 concrete slab cost?

The base cost of material for a 30×50 concrete slab is between $2.83 and $5.47 per square foot. The total cost may range from $4,245 to $8,205. However, hiring a contractor may cost between $6 and $8 per square foot, bringing the price range to $9,000 to $12,000. The biggest cost is the material.

What is 3000 psi concrete used for?

The residential workhorse of concrete, 3,000 PSI can be used for driveways, patios and sidewalks. Its durability will help shrug off the freeze-thaw cycle of harsh winters. This is a fine choice for any general construction use.

How thick should a concrete driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

What is 6000 psi concrete used for?

PRODUCT USE PSI 6000 can be used for any application requiring concrete in a minimum thickness of 50 mm (2”), such as slabs, footings, steps, columns, walls and patios.

What is 4500 psi concrete used for?

For both interior floors and garage floors, the minimum strength recommendation is 2,500 psi, however, similarly to slab projects, an ideal standard is 4,500 psi, especially for garage floors which must sustain much more wear and tear and heavy machinery.

What PSI should my concrete driveway be?

The typical concrete strength used for a driveway is in the 3000 psi to 4000 psi range, although temperate areas of the country may use lower strengths. Contractors, when ordering ready mixed concrete, should advise the producer of the intended use for the concrete.

What PSI is 7 sack concrete?

For example, in areas with harsh winter weather, a 7 bag mix, 4,000 PSI concrete and as much as 8% air content help avoid spalling of the concrete surface. In effect, the rule of 6’s is a great guide for most concrete work, but like almost any rule, exceptions should be made when necessary.

What grade of concrete is 4000 psi?

Concrete mix 4000:- this is standard grade of concrete used for flooring, pcc, rcc, footing, slab formation of garage, parking, etc. As per American standard ACI codes, strength of concrete and mix of Portland stone cement, fine aggregate and coarse aggregate, design according to cylinder test.

How strong is concrete after 3 days?

AgeStrength per cent1 day16%3 days40%7 days65%14 days90%

How long does it take 3500 PSI concrete to dry?

But to answer the question of, “How long does concrete take to set?” concrete setting time is generally 24 to 48 hours. At this point the neighborhood dog will not leave his footprints in it, but you should keep it clear of heavy equipment during this time period. Most mixes are cured at 28 days.

Is gravel needed under concrete?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

How thick does a concrete slab need to be for a garage?

The concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of “compressive strength,” which boils down to the amount of water used in the mix.